When making sheet metal garages, the most important thing is an individual approach to the customer and the construction of buildings that will fully meet his expectations. The biggest advantage of this type of steel rooms is their price, because they are much cheaper than their brick and wooden counterparts. At the same time, it is the easiest solution to apply, because the described sheet metal buildings not exceeding 35 m² do not require the finalization of costly and time-consuming official processes. They include the employment of a designer and surveyor and going through the administrative requirements in order to obtain a permit necessary to erect a building larger than 35 m².
Steel sheet metal garages
The highest quality sheet metal garages made by GMS System are an alternative solution to the very common steel structures made of trapezoidal sheet and brick. They are an offer for people who value the speed and simplicity of assembly and aesthetics the most. This type of room is equipped with a trackless overhead gate. Depending on the option chosen by the customer, it can be supplemented with: • automation, • windows, • wicket doors, • guttering, • swing doors.
Another option worth mentioning is the possibility to choose different types of wall finishes for the steel garage. GS Standard is a finish made of galvanized steel sheet, GS Standard Color is a finish made of factory-painted galvanized sheet (there are 10 colors as standard), while GS Premium guarantees, thanks to the use of an aesthetic attic, a spectacular effect. A characteristic feature of this type is the use of structural plaster.
The equipment of these sheet metal garages additionally includes an overhead sliding gate. Depending on the options chosen by the customer, it is also possible to convert it into a turn-and-turn door, add wicket doors, windows, guttering or automation.
Custom-sized double-garage metal garages
The best that a client can decide to do is trust experts and give their opinion. A double garage with an overly large area may require a building permit. What’s worse, from the point of view of the Buyer, the desire to build a larger room may be associated with an increase in costs of 8% for every 10 cm.
Garaże blaszane 4×6
A very important element of building a double garage is to determine the exact dimensions that will be needed to make it fully functional. When estimating the size of this type of steel structure, it can be mistakenly considered too small. However, it very often happens that the client requests the construction of a room larger than it is actually needed, which means that he unnecessarily spends more on building materials. The seemingly small difference in the size of double rooms may have a very serious impact on the price due to the fact that their greater height entails the need to make the entire structure from much stronger materials and with a higher concentration.
Plastered tin garages
One of the most important things when building a steel garage is to pour a floor that is strong, even and firm. The most frequently described two-bay buildings are used as parking spaces for cars weighing at least several hundred kilograms. The easiest way is to concret the ground before the building is erected. The floor may as well be made of concrete slabs or cobblestones. The support points for structural columns should be reinforced with large concrete blocks or foundation footings. After construction, the garage made of sheet metal should be anchored, i.e. attached to the ground, so that strong wind does not damage it or tear it off. It should be attached to the concrete screed with long expansion bolts, one should be 2 meters away from the other. For large structures, it may be necessary to use angles.
Double garages
Depending on the customer’s needs, steel garages can be built for one vehicle or two. The latter option is, of course, double-stand rooms with two gates. This solution also allows, for example, to combine two different colors, if acrylic sheet was used as the building material.
The offer also includes the possibility to choose the color of the buildings. As standard, it is a galvanized sheet, but you can also opt for ten other variants when selecting the Standard offer. Premium buildings are plastered and in this range you can choose from the following colors: sand, light gray, corn, white, dark gray, brick red, lemon, beige and green.
![]() |
![]() |
Construction
Garaże GMS-SYSTEM wyposażone są w bramę uchylną prowadnicową zintegrowaną z przednią ścianą. W zależności od wybranych przez Klienta opcji możliwa jest zamiana bramy na rozwierną, dodanie okna, drzwi przejściowych, orynnowania, automatu.
Types of wall finishing
• GS STANDARD — galvanized sheet metal finish
• GS STANDARD KOLOR — factory painted galvanized steel sheet finish (10 colors as standard)
• GS PREMIUM — finishing with structural plaster, the final effect is ensured by the use of an aesthetic attic
Endowment
GMS-SYSTEM garages are equipped with a sliding guide gate. Depending on the options selected by the customer, it is possible to replace the gate with a swing gate, add a window, wicket door,
guttering, automatic.
![]() |

GS Standard
[WD_Button id=7156]

GS Standard Kolor
[WD_Button id=7156]

GS Premium
[WD_Button id=7156]
garage width (mm) | 2970 / 3340 / 3710 /4080 |
garage length (mm) | 5220 / 5405 / 5590 / 5775 / 5960 |
garage height (mm) | 2240 / 2420 |
Double garages

GS Standard Dual
[WD_Button id=7156]

GS Standard Kolor Dual
[WD_Button id=7156]

GS Premium Dual
[WD_Button id=7156]
garage width (mm) | 5940 |
garage length (mm) | 5220 / 5405 / 5590 /5775 / 5960 |
garage height (mm) | 2240 / 2420 |
Colors
Depending on the version, GMS-SYSTEM garages are available in the following colors:
![]() |
![]() |
• GS STANDARD — galvanized | • GS PREMIUM — beige K10150, white K10070, brick red K12690, dark gray K11790, light gray K11750, lemon K10200, maize K12510, sand K10570, green K12880. |
![]() |
Kolor RAL | Premium TYNK | |
![]() RAL 9010
![]() RAL 8017
![]() RAL 8017 matte
![]() RAL 8004
![]() RAL 6020 matte
![]() RAL 3005
![]() RAL 9006
![]() RAL 7016
![]() RAL 7024 matte
![]() RAL 6005
|
![]() corn
![]() sand
![]() light grey
![]() white
![]() brick
![]() dark grey
![]() lemon
![]() beige
![]() green
|
GALVANIZED | ||
![]() galvanized
|
Pliki do pobrania
gms_instrukcja_garaze_stalowe_dwustanowiskowe_PL_DE_EN_2021
gms_garaże stalowe_wzotnik_TYNK_2021
gms_garaże stalowe_wzotnik_TYNK_2021
karta produktu
Gallery
Garage interior