Collective garages

Home / apart­ment sys­tem / Col­lec­ti­ve gara­ges

GMS-A Premium

GMS-A Pre­mium was built on the basis of GMS-A, the most wide­ly used mul­ti-fami­­ly buil­ding. This pro­vi­des the opti­mum balan­ce betwe­en the pri­va­cy of users and ensu­ring an ade­qu­ate ven­ti­la­tion.

zobacz wię­cej…

Specifications

  • 116 mm lamel­la with addi­tio­nal ben­ding lines and embos­sing, which incre­ases resi­stan­ce to deflec­tion
  • joins desi­gned to incre­ase the sta­bi­li­ty of  pro­fi­le con­nec­tors used for the wic­ket gate con­struc­tion
  • the gate design incre­ases  its dura­bi­li­ty thanks to quadru­ple hori­zon­tal pro­fi­le, double ver­ti­cal pro­fi­le and two cros­swi­se pro­fi­les
  • lock – stan­dard padlock option; also ava­ila­ble a lock with stan­dard insert
  • pil­lar (half-open pro­fi­le); dimen­sions of 44 x 44 with a tele­sco­pic ele­ment of 40 x 40 for height regu­la­tion; with a base and 4 options of ceiling faste­ning depen­ding on the type of  ceiling
  • possi­bi­li­ty to cre­ate a super­struc­tu­re in cer­ta­in buil­ding cir­cum­stan­ces
1. Post

width (Sz) in mm 44
height (H) in mm 2000 – 3450
2. Partition

spa­cing (S) in mm 1000
height (H) in mm 2000, 2250, 2450
width (Sz) in mm 950
3. Single-Leaf Doors

spa­cing (S) in mm 845, 960
height (H) in mm 2000
width (Sz) in mm 775, 890
4. Double-Leaf Hinged Doors

spa­cing (S) in mm 1635, 1865
height (H) in mm 2000
width (Sz) in mm 2*775, 2*890
5. Sliding doors

spa­cing (S) in mm 845
height (H) in mm 2000
width (Sz) in mm 890

Projection

GMS-A

GMS-A pro­vi­des the opti­mum balan­ce betwe­en the pri­va­cy of users and ensu­ring an ade­qu­ate ven­ti­la­tion. Attrac­ti­ve pri­ce deci­des that this is the most popu­lar solu­tion in GMS offer.

see more…

Specifications

  • 116 mm lamel­la with addi­tio­nal ben­ding lines and embos­sing, which incre­ases resi­stan­ce to deflec­tion
  • 35mm distan­ce betwe­en lamel­la
  • joins desi­gned to incre­ase the sta­bi­li­ty of  pro­fi­le con­nec­tors used for the wic­ket gate con­struc­tion
  • the gate design incre­ases  its dura­bi­li­ty thanks to quadru­ple hori­zon­tal pro­fi­le, double ver­ti­cal pro­fi­le and two cros­swi­se pro­fi­les
  • lock – stan­dard padlock option; also ava­ila­ble a lock with stan­dard insert (possi­ble in all wic­ket gates, inc­lu­ding sin­gle, double and sli­ding ones)
  • pil­lar (half-open pro­fi­le); dimen­sions of 44 x 44 with a tele­sco­pic ele­ment of 40 x 40 for height regu­la­tion; with a base and 5 options of ceiling faste­ning depen­ding on the type of  ceiling
  • possi­bi­li­ty to cre­ate a super­struc­tu­re in cer­ta­in buil­ding cir­cum­stan­ces
1. Post

width (Sz) in mm 44
height (H) in mm 2000 – 3450
2. Partition

spa­cing (S) in mm 1000
height (H) in mm 2000, 2250, 2450
width (Sz) in mm 950
3. Single-Leaf Doors

spa­cing (S) in mm 845, 960
height (H) in mm 2000
width (Sz) in mm 775, 890
4. Double-Leaf Hinged Doors

spa­cing (S) in mm 1635, 1865
height (H) in mm 2000
width (Sz) in mm 2*775, 2*890
5. Sliding doors

spa­cing (S) in mm 845
height (H) in mm 2000
width (Sz) in mm 890
6. Double-Leaf Hinged Gate

width (Sz) in mm max. 4500
height (H) in mm max. 3000
ope­ning width in mm Sz-200, H-120
7. Double-Leaf

width (Sz) in mm max. 2800
height (H) in mm 1980–2400
ope­ning width in mm Sz-240, H-180

Projection

GMS-P

GMS-P in the basic ver­sion is appre­cia­ted by users for whom pri­va­cy is impor­tant. To incre­ase the ven­ti­la­tion pro­ducts GMS-P may inc­lu­de per­fo­ra­tion (GMS-Prv) or vent holes (GMS-Pwt).

see more…

Specifications

  • 116 mm lamel­la panels with addi­tio­nal ben­ding lines and embos­sing, which incre­ase resi­stan­ce to deflec­tion
  • joins desi­gned to incre­ase the sta­bi­li­ty of  pro­fi­le con­nec­tors used for the wic­ket gate con­struc­tion
  • the gate design incre­ases  its dura­bi­li­ty thanks to quadru­ple hori­zon­tal pro­fi­le, double ver­ti­cal pro­fi­le and two cros­swi­se pro­fi­les
  • lock – stan­dard padlock option; also ava­ila­ble a lock with stan­dard insert (possi­ble in all wic­ket gates, inc­lu­ding sin­gle, double and sli­ding ones)
  • pil­lar (half-open pro­fi­le); dimen­sions of 44 × 44 with a tele­sco­pic ele­ment of 40 × 40 for height regu­la­tion; with a base and 5 options of ceiling faste­ning depen­ding on the type of  ceiling
  • possi­bi­li­ty to cre­ate a super­struc­tu­re in cer­ta­in buil­ding cir­cum­stan­ces
1. Post

width (Sz) in mm 44
height (H) in mm 2000 – 3450
2. Partition

spa­cing (S) in mm 1000
height (H) in mm 2000, 2250, 2450
width (Sz) in mm 950
3. Single-Leaf Doors

spa­cing (S) in mm 845, 960
height (H) in mm 2000
width (Sz) in mm 775, 890
4. Double-Leaf Hinged Doors

spa­cing (S) in mm 1635, 1865
height (H) in mm 2000
width (Sz) in mm 2*775, 2*890
5. Sliding doors

spa­cing (S) in mm 845
height (H) in mm 2000
width (Sz) in mm 890
6. Double-Leaf Hinged Gate

width (Sz) in mm max. 4500
height (H) in mm max. 3000
ope­ning width in mm Sz-200, H-120
7. Double-Leaf

width (Sz) in mm max. 2800
height (H) in mm 1980–2400
ope­ning width in mm Sz-240, H-180

Projection

GMS-K

GMS-K is the best solu­tion to the spa­ces that requ­ires high ven­ti­la­tion.

see more…

Specifications

  • flat gra­te panel, made of galva­ni­sed wire (loops of 50x200 mm) with addi­tio­nal rein­for­ce­ment of hori­zon­tal C-pro­­­fi­­­le of 38 × 18 mm
  • joins desi­gned to incre­ase the sta­bi­li­ty of  pro­fi­le con­nec­tors used for the wic­ket gate con­struc­tion
  • the gate design incre­ases  its dura­bi­li­ty thanks to quadru­ple hori­zon­tal pro­fi­le, double ver­ti­cal pro­fi­le and two cros­swi­se pro­fi­les
  • lock – stan­dard padlock option; also ava­ila­ble a lock with stan­dard insert (possi­ble in all wic­ket gates, inc­lu­ding sin­gle, double and sli­ding ones)
  • pil­lar (half-open pro­fi­le); dimen­sions of 44 × 44 with a tele­sco­pic ele­ment of 40 × 40 for height regu­la­tion; with a base and 5 options of ceiling faste­ning depen­ding on the type of  ceiling
1. Post

width (Sz) in mm 44
height (H) in mm 2000 – 3450
2. Partition

spa­cing (S) in mm 1000
height (H) in mm 2250
width (Sz) in mm 1250, 2500
3. Single-Leaf Doors

spa­cing (S) in mm 845, 960
height (H) in mm 2000
width (Sz) in mm 775, 890
4. Double-Leaf Hinged Doors

spa­cing (S) in mm 1635, 1865
height (H) in mm 2000
width (Sz) in mm 2*775, 2*890
5. Sliding doors

spa­cing (S) in mm 845
height (H) in mm 2000
width (Sz) in mm 890
6. Double-Leaf Hinged Gate

width (Sz) in mm max. 4500
height (H) in mm max. 3000
ope­ning width in mm Sz-200, H-120
7. Double-Leaf

width (Sz) in mm max. 2800
height (H) in mm 1980–2400
ope­ning width in mm Sz-240, H-180

Projection

GMS-EX

GMS-EX is desi­gned for exc­lu­si­ve buil­dings whe­re used modern design. Good ven­ti­la­tion whi­le main­ta­ining a small trans­lu­cen­cy satis­fy the expec­ta­tions of deman­ding custo­mers.

see more…

Specifications

  • expan­ded metal mesh par­ti­tion made of galva­ni­sed 1,5 mm ste­el , with C-beams
  • joins desi­gned to incre­ase the sta­bi­li­ty of  pro­fi­le con­nec­tors used for the wic­ket gate con­struc­tion
  • the gate design incre­ases  its dura­bi­li­ty thanks to quadru­ple hori­zon­tal pro­fi­le, double ver­ti­cal pro­fi­le and two cros­swi­se pro­fi­les
  • lock – stan­dard padlock option; also ava­ila­ble a lock with stan­dard insert (possi­ble in all wic­ket gates, inc­lu­ding sin­gle, double and sli­ding ones
  • pil­lar (half-open pro­fi­le); dimen­sions of 44 × 44with a tele­sco­pic ele­ment of 40 × 40 for height regu­la­tion; with a base and 5 options of ceiling faste­ning depen­ding on the type of  ceiling
1. Post

width (Sz) in mm 44
height (H) in mm 2000 – 3450
2. Partition

spa­cing (S) in mm 1000
height (H) in mm 2250
width (Sz) in mm 950
3. Single-Leaf Doors

spa­cing (S) in mm 845, 960
height (H) in mm 2250
width (Sz) in mm 775, 890
4. Double-Leaf Hinged Doors

spa­cing (S) in mm 1635, 1865
height (H) in mm 2000
width (Sz) in mm 2*775, 2*890
5. Sliding doors

spa­cing (S) in mm 845
height (H) in mm 2000
width (Sz) in mm 890

Projection

Collective garages

GMS col­lec­ti­ve gara­ges and par­ti­tion walls are based on ori­gi­nal modu­lar sys­tem which allows the iso­la­tion of comon spa­ce in the basment of mul­ti-fami­ly bul­dings.

Right from the moment of raised popu­la­ri­ty of col­lec­ti­ve gara­ges, both the inve­stors and users of apart­ments needed a good-looking, fast and easy to install and meeting con­struc­tion stan­dards method of deli­mi­ting the par­king spa­ces or sto­ra­ge areas/rooms. GMS Type deli­mi­ting due to its bene­fits convin­ced not only inve­stors, archi­tects and con­trac­tors, but also the inha­bi­tants of mul­ti-fami­ly houses.

The ele­ments most fre­qu­en­tly used in the deve­lop­ment of par­king spa­ces (gara­ge boxes) are:

  • poles
  • ribs
  • COMPACT gates witho­ut guide bar
  • CLASSIC gates

Installation

GMS Nawo­jo­wa gara­ge box sys­tems have been desi­gned for big gara­ges. The­re­fo­re, the instal­la­tion of any ele­ment is very easy. In the first pla­ce, ver­ti­cal posts are instal­led, to which then ele­ments are fixed using bol­ting or scre­wing. The who­le instal­la­tion pro­cess takes aro­und 15 minu­tes!

Colours

galva­ni­zed

Downloads

fol­der infor­ma­cyj­ny
kar­ta-pro­duk­tu-GMS-A
kar­ta-pro­duk­tu-GMS-P
kar­ta-mate­ria­lo­wa-GMS-K
kar­ta-mate­ria­lo­wa-GMS-EX
instruk­cja

Declaration of Utility Properties

DWU-wygr_bra­my­_GMS
KDWU-wygr_drzwi-roz­wie­ra­ne-GMS
KDWU-wygr_drzwi-prze­suw­ne-GMS
DWU-wygr_scian­ki­_GMS

DWG files for architects

GMS-A_GMS-A-Pre­mium
GMS-EX
GMS-K
GMS-P

Copyrights © 2019 GMS Corporation sp. z o.o. ul. Krynicka 55, 33–335 Nawojowa +48 18 445 70 83, biuro@gms-system.com